+44 (0) 1494 723204 info@filtaire.com
Home » Products » Filtaire 5000 » Details Filtaire 5000

Filtaire 5000

Clean, pure indoor air is essential for providing a healthy environment.

The Filtaire 5000 was developed for use within larger spaces and commercial applications, where exceptional air quality is desired or required to meet industry quality standards, and to comply with Health and Safety Executive for the Control of Substances Hazardous to Health (COSHH). We source, select and use only the very best materials and components to ensure a long and service free operational life.

Ideally, a room volume of up to 150m3 would be the capacity of a single unit, whilst larger spaces can be accommodated with multiple machines.

Filtaire air purifiers have been developed to efficiently eradicate indoor air pollution using a multi-stage radial filtration system. This is a superior design feature that enables the machines to be focused at sources of pollution (Source Control). Pollutants are thus dealt with very quickly, unlike alternative systems that mostly ‘sweep’ walls and ceilings. Filtaires, focused at the pollution, will remove most of it in seconds.

Particulate filtration down to 0.3 of a micron is achieved as standard, with a HEPA filter cartridge.

A choice of specialist activated carbon and contaminant specific filters are available, to remove vapour phase pollutants and allows the system to be tailored to the needs of a very wide range of individual applications. The carbons, in either pellet or granular form, are also encased in filter media and act as a pre-filter to protect and extend the life of the main particulate cartridge. Carbon filters are interchangeable, and therefore increase the versatility of the equipment which can be easily moved to an alternative location and use, if necessary.

Filtaire 5000Filtaire 5000Filtaire 5000Filtaire 5000

Filtaire air purifiers recirculate air around an enclosed space many times an hour, removing contaminates and returning cleaned air to the room to provide a significant improvement in indoor air quality (IAQ) and reduction in the risk of breathing in unwanted or harmful contaminates. Contaminates may be a) particulate, i.e. solid particles down to 0.1 microns (1 micron = 1/1000 millimeter) such as bacteria,viruses,pollens,spores,smoke etc., or b)gaseous in the form of Volatile Organic Compounds (VOC’s) e.g. solvent fumes and odours. This is also applicable where the equipment is used to control contaminates during critical manufacturing processes such as delicate electronics , for example, where even small amounts of dust or contaminates may spoil products or processes.

The speed at which these contaminates are removed depends on the efficiency and type of filter medium employed and the air recirculation rate. The Filtaire 5000 has a variable speed fan system so that air recirculation rates can be adjusted to suit contaminate levels, room size and changing conditions.

In tests, the unit has been found to reduce the contaminate level of particulates by 64% after recirculating the air once within a chamber. Thus 64% of contaminates are removed each time the air is recirculated producing a cumulative effect so that contaminates can be reduced by 99.83% after twelve recirculations.

An important factor in dealing with indoor air quality is the ability for Filtaire Air Purifiers to be a highly effective and simple method of infection control. There are two main routes for transferring microbial and viral infections, which are airborne and contact. Virus particles normally are transmitted as aerosols in various body fluids. If the organisms are airborne or swept up from a contact surface, they can be removed if the air is taken through a Filtaire. Studies in a Hospital context and by independent labs have shown how pathogenic bacterial and micro fungal organisms can be collected. In the workplace and wherever people congregate, the use of Filtaire Purifiers can as a result, decrease absence levels.

There are many cases where Filtaire Purifiers will give much better results than ventilation and extract systems.

The remote separate speed control- which is hard wired can be suitably positioned for convenience and security.

The Filtaire system offers a low cost solution in delivering  IAQ of a very high standard.

It is inexpensive to install requiring no expensive ductwork and or fans. Energy costs are low (max 130 watts) and because it continuously recirculates the air, Filtaire units have the added advantage of not requiring any additional heating or cooling when compared to most extract and ventilation systems, although it will compliment air conditioning.

Fitting by a suitably qualified electrician should take approximately one hour and replacing filters requires no specialist skills or tools - just a screwdriver, and takes less than 5 minutes to complete.

The Filtaire 5000 is capable of providing exceptional indoor air quality in most situations to benefit people and processes whilst helping to ensure compliance with Health & Safety Executive recommendations and COSHH regulations.

With the easy recommended replacement of filters, it will give years of trouble free service.

Call or contact us today to discuss how Filtaire can improve your air quality and business

Our resources link has further information, including test results, customer testimonials and fitting/user instructions.

Back to Product


Technical Data

  • Dimensions - 200 x 500 x 500mm (D x W x L)
  • Weight - 11 Kilos
  • Electrical - 230V, 130W, 0.6amps
  • Airflow - Up to 600m³/hour
  • Sound Power Level at maximum speed - 72.5 dB
  • A facility is provided for the use of a pressure drop gauge
  • Packaging - Individually boxed complete with speed control and filters
  • Pack dimensions - 24.5 x 58.5 x 59cm
    Volume - 1.191m³
  • Weight (total) - 12.22Kg